In this video I'm turning a stainless steel M20 nut into a tiny adjustable wrench. All three parts are completely made out of one single nut. First I turned the thread and the hexagon away on the lathe. After cutting a slit into it I was able to open it up with the help of a torch. A few heats later I had a very straight and flat piece of stainless steel. I first went then on the milling machine and milled the whole part to the final width of the wrench. I then cut of a piece with the hacksaw to make the body out of it. With a tiny t-slot endmill I was able to mill the t-slot very nicely with a very low feedrate and a lot of oil. After milling the square hole and drilling the deep 2.1mm hole I started to shape the outer contour. Then I moved on by making the movable part of the wrench. I milled it all in one operation with very careful steps to not risk and chatter marks or whatsoever. After filing the square bit round I sanded the rectangular part until it fitted nicely into the body. I then cut the M2 thread and cut the piece off with the hacksaw, assembled it with the body and sanded both parts flush. Then I started rounding off all edges with needle files, sandpaper and finished it with very fine steel wool for a brushed finish. All what's left to do now was making the knurled adjuster nut. For that I forged the remaining of the nut into a square piece, which I could clamp in the four jaw chuck on the lathe.I turned it round, supported it with a live center, put the knurling onto it, drilled and tapped the hole, chamfered it and parted it off. Then it was just a matter of quickly assembling the three pieces.
This was a very cool little project for me. I really like how it turned out. It's a very cool little item in my opinion.

I hope you like my work and enjoy the video.

Huge thank you to all of my Patreon supporters and especially to:

Adel AlSaffar
AK
Alex McGeorge
Alfonso Baz
Alistair Moor
Arron Metcalf
Ben Sigelman
Bendurion
Brenna Redpath
Chris walter
Dane Prince
David Barker
David Lehnus
Edward Conway
Embiss
Haitham Al Zir
John Shebanow
Joseph Kamps
Josh Ledford
Josh Wasserman
Joshua Bentley
Joshua Scher
Kar Marsten
Kerem Yollu
Lambda GPU Workstations
LordPi
Mellissa Marcus
Monte Gibbs
Nathaniel Jack
NoLoneSurvivor
Pat Thrasher
Peter Riddett
potokslow
Robert Brindley
SophieHDLM
Steve Bothe
StevenVR
Tyler Carruth
VaushVidya
Vickie Bligh
Vince Valenti
Will Black
Xavier Carbel
Yale Baker
Yuri Zapuchlak
Adam Holtzclaw
Alex Findlay
Alipasha Sadri
Andrew Phillips
Arni Bjorgvinsson
Bonnie Williamson
Brett Pitts
Brian Hoerl
Chad Bryant
Charles Copenhaver
Crystal Cash
Damien Fuller-Sutherland
Daniel Trejo
Daniel Varga
Dave Hardware
David P Hruska
David Powell
Evan Serrano
Grant Daniel
Haley McFadden
Hard_Boiled
Jack Curry
jake meckley
Jeff Smith
Jeremy Cole
Johan Vergeer
Joël Franusic
Justin Blackwood
Ken Rosso
Kevin Robinson
Kurt Gazow
L Rlta
Lina Machina
Marc Cerisier
Marc Staedelin
Mary Casella
Mellissa McConnell
Michael Lamp
Mossy_Forrest