PLAS In-Line Rotary™ Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6” to 8” (153 - 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15° bevel on both sides of the cut. For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2” wall thickness. For cutting PE pipe*, Reed developed a hardened, tool steel blade. The engineered blade tip drives chips out of the way, making PE cuts easy to accomplish. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades.

•Safe to use as it creates no dust and chips fall where they are cut. There is no danger of chips being blown well into pipe.
•Only 6"-8" clearance needed to turn PLAS tool around pipe.
•Cuts out-of-round pipe because of spring loaded nuts.
•Simultaneously cut and bevel PVC using cut-off blade and bevel blade.
•This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs!

For more information about Reed’s PLAS In-Line Rotary™ Pipe Cutters, visit our website at: https://www.reedmfgco.com/en/products/plastic-pipe-tools/plas-in-line-rotary-pipe-cutters/?utm_source=social&utm_medium=dailymotion

To learn more about Reed, to browse all products, or find where to buy, visit our website: https://www.reedmfgco.com./en/?utm_source=social&utm_medium=dailymotion

Please contact us with any questions: https://www.reedmfgco.com/en/contact-reed/?utm_source=social&utm_medium=dailymotion

Let’s Connect!
Facebook: https://www.facebook.com/ReedManufacturing
Twitter: https://twitter.com/ReedPipeTools
Instagram: https://www.instagram.com/reedpipetools