How to fix Samsung Tablet 2 with not charging problem. It is a chip level fixing. I didnt remove the battery for 10 sec. or recharged the battery externally. I studied the schematic and fixed the problem as engineer. It is a final fixing so the client will not comeback with a discharged tablet again. Also, the battery is not charging continuously. When it gets charged, it will stop charging.\r
I watched so many videos performed by non expert people repeating all what they watched from each other, using a metal knife, turning on the tablet until next time it descharges again.\r
So, it was time to really show you guys, how to fix the no charging loop problem. .and remember, if there is another video alike, just check the date and find out who was the first one who really fixed it like this! ;-) \r
If you like it and if it helps you, please give a LIKE and join my channel for more Electronics Laboratory and Engineering videos.\r
Thanks by watching it!\r
Bob. Kalpon\r
NOTE: JareK K added a picture for you: \r
THANKS JAREK for you contribuition. :-)\r
About the diode used in the video: I didnt have an SMD supplier on that time. So, you can do as I did. Take a good size SMD diode from another smartphone, tablet or laptop. It has to be a good one, and generally they are located close to the main power connector or charging circuit.\r
This is the video how to ope it: \r
This is the schematic for Tab 2: \r
Tab 2 Service Manual: \r
Download it and save it, before the Websites page goes offline.