Quick Release Belt Drive Feeding. The "Main Belt Drive" Some Zits

Other parts for this "Quick Release Belt Drive Feeding" to follow

I am using Slic3r to slice onto a SD card for use in LCD12864 graphics display controller driving RAMPS 1.4 via Marlin

BLTouch Probe used for Auto Home and bed leveling. Very helpful.

Antclabs

http://www.antclabs.com

Protomaker Black Sprint Original 3D Printer

PLA Black 1.75mm*, E3D v6 Nozzle 0.4mm

190° C First Layer and 180° C Other layers.

Heat Bed 70° C, yes for PLA!!!

Infill set to 80%. Layers 0.06 {fine}

No supports or raft.

Retraction set to 0.7mm at 40mm/s

Surface Blue Painters Tape cleaned with Isopropyl alcohol.

BLTouch Classic Auto Leveling Probe Antclab website went that extra mile to help me

http://www.antclabs.com

* PLA measured at 1.70mm

This Quick Release Belt Drive Feeding is based on:-

This is a MXL Belt Bowden Extruder 1.75mm

http://www.thingiverse.com/thing:581170

The eBay seller who made the feeder used to make this print was very helpful and also went that extra mile to help me

http://www.ebay.co.uk/usr/pilvytis

.