Kapton Tape PLA tested and FAILS pr 5 Kapton Tape Glue Stick

This is Part 5 of my testing Kapton Tape with PLA filament printing, using Glue Stick on Kapton Tape and it FAILS with PLA printed parts lifting from the build plate.

Notes: I tried the same print with the heated bed temperature set to 70° C and then set to 50° C. At 50° C it did stay on the build plate, (shown at the end of this video), and it finish the print without lifting off the print bed, (this indicates a lower heated bed temperature is more beneficial), but I feed this is too unreliable to use this method all the time.

Protomaker Black Sprint Original 3D Printer some repair damage

It may take some time to get this 3D printer working to a level where it is usable due to lack of budget

Powder Coated Mild Steel Structure With Acrylic Build Platform
• Product Type : All In One Printers
• Cartridge Type : Original
• Utility : 3d Printing
• Printing Output : Colored
• Print Technology : Fused deposition modelling (FDM)
• Size : Large
• Other Features : Powder Coated Mild Steel Structure With Acrylic Build Platform
• SUPC: SDL051787633

My Wordpress Blog will tell you more about:-


Protomaker Black Sprint Original 3D Printer

https://protomaker3dprinter.wordpress.com/

Tweets about 3D Printers: tips, hardware software, filament ,etc...

https://twitter.com/myvideostowatch
.