This is the system for monitoring Temperature and humidity and makes phone call and SMS alerts. The whole system works as a standalone system with battery back up. The temperature and humidity data logger transmits data to a computer network through WiFi or wired network.
This is the auto dialer by Vacker and this is the temperature and humidity data logger by T and D, Japan. This recorder monitors the temperature and humidity using an external sensor. The dialer makes phone calls and sends S M S to mobile phones of up to 10 operators depending on various models. The dialer operates with a SIM card and has a separate battery backup.
The data logger and auto dialer are having separate DC power supply adaptors.
The accessories supplied along with the system are
1. Power supply adaptor for the temperature recorder
2. Antenna for the dialer
3. Temperature and humidity sensor
4. Power supply adaptor for the dialer.
Now we will show the installation of the system.
Remove the screws of the dialer. Carefully remove the cover of the dialer.
Insert the SIM card. Ensure that the SIM card does not have any password. Slightly pull out the battery. In order to prevent damage the battery is fixed with sticking tape onto the body. These are the two holes for installation to the wall. Drill two holes on the wall and fix the device on to the wall.
Insert the temperature and humidity sensor to the left side of the recorder. Pull the sensor wire and fix the sensor at any comfortable length.
The blue light on the dialer indicates that the mobile network is functional and the system is working.
For programming the SIM card you need to send S M S to this device from any other mobile number. Please see our separate video at the link below to program the SIM card.
Now the device is ready to work as a standalone unit and will give phone call and SMS alerts if the temperature or humidity goes above the programmed limits.
If the device is already programmed for network connection, plug in the Ethernet cable from your network onto the port on the right side of the recorder. Please see a separate video at the following link for instructions on programming. If the device is with WiFi connection facility, follow the procedure accordingly.
Now the installation is complete is fully functional.
Vacker Group supplies various solutions for Temperature and Humidity monitoring and alert for critical facilities.
This temperature and humidity monitoring system can be used for cold storage, cold rooms, ware house, refrigerator, freezer, server room, data center etc.
Contact details:
Vacker LLC
306, RKM Building,
Ittihad Road, Hor Al Anz
Deira, Dubai
Tel: +971 42 66 11 44
Email : [email protected]